Mohammed Nasman Posted January 31, 2022 Share Posted January 31, 2022 On 1/28/2022 at 8:17 PM, Farshad Mohajeri said: Estimated release date: Next Monday (or sooner) It seems not sooner, but today is Monday, so hopefully today 😄 Quote Link to comment Share on other sites More sharing options...
Administrators Farshad Mohajeri Posted January 31, 2022 Administrators Share Posted January 31, 2022 7 hours ago, Wilton Ergon said: it would be good to release the information on how to configure the new scenario in the user manual, even before the version. Manual updated. 1 1 Quote Link to comment Share on other sites More sharing options...
Stemon63 Posted February 1, 2022 Share Posted February 1, 2022 Hi Wilton (or other friends) how is the load situation with the new update? Thanks a lot! Quote Link to comment Share on other sites More sharing options...
Wilton Ergon Posted February 1, 2022 Author Share Posted February 1, 2022 I'll try to set up the production environment tonight, but I still have some doubts. 1 Quote Link to comment Share on other sites More sharing options...
Administrators Farshad Mohajeri Posted February 2, 2022 Administrators Share Posted February 2, 2022 9 hours ago, Wilton Ergon said: I'll try to set up the production environment tonight, but I still have some doubts. What are those doubts? Quote Link to comment Share on other sites More sharing options...
Administrators Farshad Mohajeri Posted February 2, 2022 Administrators Share Posted February 2, 2022 You can switch to Mode-2 gradually. You can start with one ServerNode and go on. Quote Link to comment Share on other sites More sharing options...
Stemon63 Posted February 2, 2022 Share Posted February 2, 2022 12 hours ago, Wilton Ergon said: I'll try to set up the production environment tonight, but I still have some doubts. I am not yet able to put a multiserver system with Unigui under stress. I'll do it soon, but I wanted to know how the new system behaves from those who already have the architecture ready. Thank you very much for the information you will want to share. I expect amazing results (I hope)  🙂 Quote Link to comment Share on other sites More sharing options...
Wilton Ergon Posted February 2, 2022 Author Share Posted February 2, 2022 6 hours ago, Farshad Mohajeri said: Quais são essas dúvidas? I tried yesterday to change to mode 2 without success, I updated the version and kept the mode 0. my previous configuration is like this: master server gepweb_d.dll (hyperserver dll) configured in IIS gepweb_d.cfg contains the list of slave servers. using in the url field only the iplocal ex: [server-0] enabled=1 url=http://10.32.128.147:8077 name=APP1 token=ydhtkz211022170003821 on slave servers I have there I have the hyper_service.exe (service running on windows) hyper_service.cfg that contains the settings with their respective token (same as the master server) basically on main server, configuration in IIS  needed to keep my environment working, I still kept the previous configuration.    I had reported this problem, and it is in the log that it had been fixed, but it still continues.   on slave servers, hyper_service service running --------------- now, I create a public url for each slave server, so that it is used on the master server, in the global_url field [server-0] enabled=1 url=http://10.32.128.147:8077 name=APP1 token=xxxxxxxxxxxx global_url=https://gepweb01.mydomain.com.br/gepweb_d.dll  cluster_mode=2 avoid_direct_access=1 url_timeout_secs=300 in this case on the slave server, I configured my application in IIS, so that it is publicly visible. I believe that is what is wrong. when I access the address gepweb.mydomain.com.br it does the wrong redirect and does not load the application on the slave servers will I still keep the same operation, just running the hyperserver service?  Quote Link to comment Share on other sites More sharing options...
Administrators Farshad Mohajeri Posted February 2, 2022 Administrators Share Posted February 2, 2022 url=http://10.32.128.147:8077 global_url=https://gepweb01.mydomain.com.br/gepweb_d.dll  The above url paramater is no longer valid. Here is the correct config: url=https://gepweb01.mydomain.com.br/gepweb_d.dll global_url= Since both URLs are the same you only need to assign the url parameter. Quote Link to comment Share on other sites More sharing options...
Wilton Ergon Posted February 2, 2022 Author Share Posted February 2, 2022 I'll try this at night.. because this change needs to stop the services. where do I indicate that if the user tries to access https://gepweb01.mydomain.com.br/gepweb_d.dll it will not open the system. because as I configured in iis this address on the slave server, it is visible on the internet and can be opened. Quote Link to comment Share on other sites More sharing options...
Administrators Farshad Mohajeri Posted February 2, 2022 Administrators Share Posted February 2, 2022 18 minutes ago, Wilton Ergon said: in this case on the slave server, I configured my application in IIS, so that it is publicly visible. I believe that is what is wrong. You can run your app either in Service Mode or in IIS mode. Both are acceptable. In service mode you can assign a global IP and open port 8077 to public -OR- run your Service app on port 80. In IIS mode you need to use the DLL version. Â Â Quote Link to comment Share on other sites More sharing options...
Administrators Farshad Mohajeri Posted February 2, 2022 Administrators Share Posted February 2, 2022 Just now, Wilton Ergon said: I'll try this at night.. because this change needs to stop the services. where do I indicate that if the user tries to access https://gepweb01.mydomain.com.br/gepweb_d.dll it will not open the system. because as I configured in iis this address on the slave server, it is visible on the internet and can be opened. Since you are using a secure URL (https) in your slave, you must copy SSL DDLs into master's folder as stated in our docs. Quote Link to comment Share on other sites More sharing options...
Wilton Ergon Posted February 2, 2022 Author Share Posted February 2, 2022 1 minute ago, Farshad Mohajeri said: Como você está usando uma URL segura (https) em seu slave, você deve copiar SSL DDLs para a pasta master conforme indicado em nossos documentos.  my certificate is installed and configured in IIS,   in the manual it says a folder that does not exist would these files be?   Quote Link to comment Share on other sites More sharing options...
Administrators Farshad Mohajeri Posted February 2, 2022 Administrators Share Posted February 2, 2022 6 minutes ago, Wilton Ergon said: Â my certificate is installed and configured in IIS, Â Â in the manual it says a folder that does not exist would these files be? Â Â That's OK. I'm talking about master server's ability to establish a secure connection with slaves. For this, it requires those DLLs to be presented in the related folder. Quote Link to comment Share on other sites More sharing options...
Administrators Farshad Mohajeri Posted February 2, 2022 Administrators Share Posted February 2, 2022 Here is the correct folder: ..\Framework\uniGUI\SSL\dll Quote Link to comment Share on other sites More sharing options...
Stemon63 Posted April 20, 2022 Share Posted April 20, 2022 On 2/1/2022 at 7:11 PM, Stemon63 said: Hi Wilton (or other friends) how is the load situation with the new update? Thanks a lot! Hi, please share your experience on heavy load with latest release! How many sessions can you manage with good performance, and with how many servers? Thanks a lot! Quote Link to comment Share on other sites More sharing options...
Wilton Ergon Posted April 20, 2022 Author Share Posted April 20, 2022 I had a lot of access at the end of last year, as I work with the educational system, and like all good Brazilians, I leave everything to the last minute, many users only leave things to do things at the last minute, this year I still didn't have so much access, and still I can't share about it, but after the new version, I never had problems with slowness again, although I didn't have so many users connected.. as soon as I get to good numbers I'll share my experience here. 2 Quote Link to comment Share on other sites More sharing options...
Stemon63 Posted April 20, 2022 Share Posted April 20, 2022 2 hours ago, Wilton Ergon said: I had a lot of access at the end of last year, as I work with the educational system, and like all good Brazilians, I leave everything to the last minute, many users only leave things to do things at the last minute, this year I still didn't have so much access, and still I can't share about it, but after the new version, I never had problems with slowness again, although I didn't have so many users connected.. as soon as I get to good numbers I'll share my experience here. Thanks Wilton Quote Link to comment Share on other sites More sharing options...
Luciano França Posted December 6, 2022 Share Posted December 6, 2022 On 4/20/2022 at 9:27 AM, Wilton Ergon said: Tive muito acesso no final do ano passado, enquanto trabalho com o sistema educacional e, como todos os bons brasileiros, deixo tudo para o último minuto, muitos usuários deixam as coisas para fazer as coisas no último minuto, este ano eu ainda não tinha tanto acesso e ainda não posso compartilhar sobre isso, mas depois da nova versão, Nunca mais tive problemas com lentidão, embora não tivesse tantos usuários conectados ... assim que chegar a bons números, compartilharei minha experiência aqui. Hello how are you. I saw your topic and I was curious about how unigui is performing in the latest versions in this year 2022, could you share. How many users maximum accesses and if it improved 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.