Jump to content


Photo

Build Error installing Trial Version


  • Please log in to reply
20 replies to this topic

#1 eddiemuniz71

eddiemuniz71

    Member

  • Members
  • PipPip
  • 11 posts

Posted 23 November 2017 - 08:52 PM

I just added 10.2 Berlin to my existing 10.1,  tried to install and then build the units.  I get an error after building a couple of the units successfully.  When I build uniTools25.bpl  I get an error on this line

 

uniZLibEx in 'uniZLibEx.pas' {$ENDIF};  The units that follow that also give me the errors when trying to build them.

 

I have already attempted to clean, remove programs, and reinstall and build and I get stuck in the same spot.   PLease help !!

 

** Just went to that bpl and uniZlibEx.pas is Xout,  I searched for it and I cannot find that .pas file, alkso the uniZLib.Ex.pas.      Did I miss a step somewhere in the install process ??

 

 

Eddie M


  • 0

#2 Farshad Mohajeri

Farshad Mohajeri

    Administrator

  • Administrators
  • 9874 posts

Posted 24 November 2017 - 03:46 AM

Hi,

 

Please look under Framework\uniTools\Dcu\Delphi\2018 folder. There must be all the uniTools DCU files.

If they are not there then some has went wrong.

Please try installing again.


  • 0

#3 eddiemuniz71

eddiemuniz71

    Member

  • Members
  • PipPip
  • 11 posts

Posted 24 November 2017 - 05:00 PM

Thanks you for reply,

 

I dont have a 2018 folder I have a 2020 and a 2021 folder, did I install the wrong version ??   I am using Berlin and Tokyo.

 

UnZlibEx.dcu is in that folder.   

 

I have tried to uninstall and reinstall a few times.    I have a few drives on this machine.  I have an E: Drive and C: Drive I use for programs,  I initially started on the E and then decided to just put it on C when it did not work thinking it could be a path issue but that did not work either.

 

Sounds to me like its a some kind of path issue possibly ?

 

PLease advise as I need to test something and confirm that I want to purchase the full edition for a project I need to start on as soon as possible.

Let me know if you want me to post any additional info.

 

Thanks again !!

 

Eddie M


  • 0

#4 Farshad Mohajeri

Farshad Mohajeri

    Administrator

  • Administrators
  • 9874 posts

Posted 25 November 2017 - 09:12 AM

I updated trial edition to latest version.

When you install trial edition you should have all DCU files under installation folder.

Please download the latest version and install using default options.


  • 0

#5 eddiemuniz71

eddiemuniz71

    Member

  • Members
  • PipPip
  • 11 posts

Posted 25 November 2017 - 04:51 PM

I am sorry but still not working. 

  • Before downloading the new trial I went to Remove Programs and uninstalled FMSoft
  • then removed the FMSoft Folder that still existed in the Program Files(x86).
  • Reset the computer just in case
  • Downloaded the new version  1421
  • Ran the install (By the way it did not ask me for any of the user information, it went straight to the install folder quiestion
  • Install went without error. 
  • Opened Tokyo
  • Opened uniGUI_D10_2_Tokyo_PlusGroup
  • That gave me the list of the 13 bpls
  • Built R2021 no problem.
  • Build D2021 no problem
  • Build uniTools25 get an error.   When I expand the bpl I see that under contains uniDateUtils.pas and uniZlibEx.pas have a red X
  • Under Unigui25Core.bpl Contains  UniguiServerForm.pas also has an X.
  • In my C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2021  FOLDER  uniDateUtils,dcu and uniZlibEx.dcu are there but no .pas files.

I have installled the trial before and had no issues, when you say uninstall all design packages in your instructions I assume all FMSoft ones not ALL correct ?  If so under packages I am not seeing FMSoft there anywhere to be able to remove.    The only difference this time from the previous time I installed the trial a few months ago was that this time I only selected Berlin and Tokyo, last time I installed ALL versions.  

 

Hope this helps in figuring this out because I cannot make it work.  Your assistance is appreciated.

 

Eddie M


  • 0

#6 Freeman35

Freeman35

    Advanced Member

  • uniGUI Subscriber
  • PipPipPipPip
  • 215 posts

Posted 25 November 2017 - 05:30 PM

Hello,

Did you check "...\Dcu\Delphi2021" dcu folder(s) added in delphi library path?


  • 0

#7 Farshad Mohajeri

Farshad Mohajeri

    Administrator

  • Administrators
  • 9874 posts

Posted 25 November 2017 - 06:06 PM

uniDateUtils,dcu and uniZlibEx.dcu

 

 

Yes, there should be only DCUs. Pascal files are not  deployed.

Can you paste the error message you are getting?

 

Thanks


  • 0

#8 eddiemuniz71

eddiemuniz71

    Member

  • Members
  • PipPip
  • 11 posts

Posted 25 November 2017 - 10:12 PM

Yes it is in the Delphi Library Path.

 

Farshad the error is:

[dcc32 Fatal Error] uniTools25.dpk(46): F2063 Could not compile used unit 'InstDecode'

 

I should have sent that to you earlier, I was assuming it was a path issue but perhaps it is not.

 

EM


  • 0

#9 Farshad Mohajeri

Farshad Mohajeri

    Administrator

  • Administrators
  • 9874 posts

Posted 26 November 2017 - 03:16 PM

[dcc32 Fatal Error] uniTools25.dpk(46): F2063 Could not compile used unit 'InstDecode'

 

 

Is this the complete error message?


  • 0

#10 eddiemuniz71

eddiemuniz71

    Member

  • Members
  • PipPip
  • 11 posts

Posted 26 November 2017 - 04:50 PM

Build started 11/26/2017 11:48:49 AM.
__________________________________________________
Project "C:\Program Files (x86)\FMSoft\Framework\uniTools\uniTools25.dproj" (Build target(s)):
Target BuildVersionResource:
    c:\program files (x86)\embarcadero\studio\19.0\bin\cgrc.exe -c65001 "uniTools25.vrc" -founiTools25.res 
    CodeGear Resource Compiler/Binder
    Version 1.2.2 Copyright © 2008-2012 Embarcadero Technologies Inc.
    
    Microsoft ® Windows ® Resource Compiler Version 6.0.5724.0
    
    Copyright © Microsoft Corporation.  All rights reserved.
    
    
    Deleting file "uniTools25.vrc".
    Deleting file "uniTools25.$manifest".
Target _PasCoreCompile:
    c:\program files (x86)\embarcadero\studio\19.0\bin\dcc32.exe -$D0 -$L- -$C- -$Y- --no-config -B -Q -Z -TX.bpl -AGenerics.Collections=System.Generics.Collections;Generics.Defaults=System.Generics.Defaults;WinTypes=Winapi.Windows;WinProcs=Winapi.Windows;DbiTypes=BDE;DbiProcs=BDE;DbiErrs=BDE -DRELEASE -I"c:\program files (x86)\embarcadero\studio\19.0\lib\Win32\release";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\Imports;"c:\program files (x86)\embarcadero\studio\19.0\Imports";C:\Users\Public\Documents\Embarcadero\Studio\19.0\Dcp;"c:\program files (x86)\embarcadero\studio\19.0\include";"E:\Program Files (x86)\Raize\RC6\Lib\RX10.2\Win32";"E:\Program Files (x86)\Raize\RadiantShapes\Lib\RX10.2\Win32";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\Delphi102Tokyo\Win32\Release";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\xlsAdapter";"E:\Program Files (x86)\FastReports\LibD25";"E:\Program Files (x86)\Winsoft\Camera for Android\Delphi101-Win32";"E:\Program Files (x86)\Winsoft\OBR for FireMonkey\Delphi101-Win32";"E:\Program Files (x86)\FastReports\LibD24";"E:\Program Files (x86)\Raize\RadiantShapes\Lib\RX10.1\Win32";"E:\Program Files (x86)\Raize\RC6\Lib\RX10.1\Win32";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\CatalogRepository\Essentials-1.1\source;"C:\Program Files (x86)\FastReports\FastReport FMX Embarcadero edition\LibD24r";f:\users\eddie\documents\embarcadero\studio\utilities\tmseditcontrols;"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Dcu\Delphi2020";"C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2020";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\Delphi101Berlin\Win32\Release";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\CatalogRepository\Essentials-1.2\source;"E:\Program Files (x86)\Devart\SDAC for RAD Studio 10.2\Lib\Win32";"E:\Program Files (x86)\Devart\SDAC for RAD Studio 10.2\Bin\Win32";"C:\Program Files (x86)\FMSoft\Framework\uniGUI";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\uIndy";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Core";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\VCL";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Components";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Design";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Res";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\uSynEdit\Source";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Dcu\Delphi2021";"C:\Program Files (x86)\FMSoft\Framework\uniTools";"C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2021" -LEC:\Users\Public\Documents\Embarcadero\Studio\19.0\Bpl -LNC:\Users\Public\Documents\Embarcadero\Studio\19.0\Dcp -NU"C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2021" -NSWinapi;System.Win;Data.Win;Datasnap.Win;Web.Win;Soap.Win;Xml.Win;Bde;System;Xml;Data;Datasnap;Web;Soap; -O"c:\program files (x86)\embarcadero\studio\19.0\lib\Win32\release";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\Imports;"c:\program files (x86)\embarcadero\studio\19.0\Imports";C:\Users\Public\Documents\Embarcadero\Studio\19.0\Dcp;"c:\program files (x86)\embarcadero\studio\19.0\include";"E:\Program Files (x86)\Raize\RC6\Lib\RX10.2\Win32";"E:\Program Files (x86)\Raize\RadiantShapes\Lib\RX10.2\Win32";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\Delphi102Tokyo\Win32\Release";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\xlsAdapter";"E:\Program Files (x86)\FastReports\LibD25";"E:\Program Files (x86)\Winsoft\Camera for Android\Delphi101-Win32";"E:\Program Files (x86)\Winsoft\OBR for FireMonkey\Delphi101-Win32";"E:\Program Files (x86)\FastReports\LibD24";"E:\Program Files (x86)\Raize\RadiantShapes\Lib\RX10.1\Win32";"E:\Program Files (x86)\Raize\RC6\Lib\RX10.1\Win32";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\CatalogRepository\Essentials-1.1\source;"C:\Program Files (x86)\FastReports\FastReport FMX Embarcadero edition\LibD24r";f:\users\eddie\documents\embarcadero\studio\utilities\tmseditcontrols;"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Dcu\Delphi2020";"C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2020";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\Delphi101Berlin\Win32\Release";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\CatalogRepository\Essentials-1.2\source;"E:\Program Files (x86)\Devart\SDAC for RAD Studio 10.2\Lib\Win32";"E:\Program Files (x86)\Devart\SDAC for RAD Studio 10.2\Bin\Win32";"C:\Program Files (x86)\FMSoft\Framework\uniGUI";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\uIndy";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Core";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\VCL";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Components";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Design";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Res";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\uSynEdit\Source";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Dcu\Delphi2021";"C:\Program Files (x86)\FMSoft\Framework\uniTools";"C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2021" -R"c:\program files (x86)\embarcadero\studio\19.0\lib\Win32\release";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\Imports;"c:\program files (x86)\embarcadero\studio\19.0\Imports";C:\Users\Public\Documents\Embarcadero\Studio\19.0\Dcp;"c:\program files (x86)\embarcadero\studio\19.0\include";"E:\Program Files (x86)\Raize\RC6\Lib\RX10.2\Win32";"E:\Program Files (x86)\Raize\RadiantShapes\Lib\RX10.2\Win32";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\Delphi102Tokyo\Win32\Release";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\xlsAdapter";"E:\Program Files (x86)\FastReports\LibD25";"E:\Program Files (x86)\Winsoft\Camera for Android\Delphi101-Win32";"E:\Program Files (x86)\Winsoft\OBR for FireMonkey\Delphi101-Win32";"E:\Program Files (x86)\FastReports\LibD24";"E:\Program Files (x86)\Raize\RadiantShapes\Lib\RX10.1\Win32";"E:\Program Files (x86)\Raize\RC6\Lib\RX10.1\Win32";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\CatalogRepository\Essentials-1.1\source;"C:\Program Files (x86)\FastReports\FastReport FMX Embarcadero edition\LibD24r";f:\users\eddie\documents\embarcadero\studio\utilities\tmseditcontrols;"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Dcu\Delphi2020";"C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2020";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\Delphi101Berlin\Win32\Release";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\CatalogRepository\Essentials-1.2\source;"E:\Program Files (x86)\Devart\SDAC for RAD Studio 10.2\Lib\Win32";"E:\Program Files (x86)\Devart\SDAC for RAD Studio 10.2\Bin\Win32";"C:\Program Files (x86)\FMSoft\Framework\uniGUI";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\uIndy";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Core";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\VCL";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Components";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Design";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Res";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\uSynEdit\Source";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Dcu\Delphi2021";"C:\Program Files (x86)\FMSoft\Framework\uniTools";"C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2021" -U"c:\program files (x86)\embarcadero\studio\19.0\lib\Win32\release";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\Imports;"c:\program files (x86)\embarcadero\studio\19.0\Imports";C:\Users\Public\Documents\Embarcadero\Studio\19.0\Dcp;"c:\program files (x86)\embarcadero\studio\19.0\include";"E:\Program Files (x86)\Raize\RC6\Lib\RX10.2\Win32";"E:\Program Files (x86)\Raize\RadiantShapes\Lib\RX10.2\Win32";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\Delphi102Tokyo\Win32\Release";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\xlsAdapter";"E:\Program Files (x86)\FastReports\LibD25";"E:\Program Files (x86)\Winsoft\Camera for Android\Delphi101-Win32";"E:\Program Files (x86)\Winsoft\OBR for FireMonkey\Delphi101-Win32";"E:\Program Files (x86)\FastReports\LibD24";"E:\Program Files (x86)\Raize\RadiantShapes\Lib\RX10.1\Win32";"E:\Program Files (x86)\Raize\RC6\Lib\RX10.1\Win32";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\CatalogRepository\Essentials-1.1\source;"C:\Program Files (x86)\FastReports\FastReport FMX Embarcadero edition\LibD24r";f:\users\eddie\documents\embarcadero\studio\utilities\tmseditcontrols;"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Dcu\Delphi2020";"C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2020";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\Delphi101Berlin\Win32\Release";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\CatalogRepository\Essentials-1.2\source;"E:\Program Files (x86)\Devart\SDAC for RAD Studio 10.2\Lib\Win32";"E:\Program Files (x86)\Devart\SDAC for RAD Studio 10.2\Bin\Win32";"C:\Program Files (x86)\FMSoft\Framework\uniGUI";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\uIndy";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Core";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\VCL";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Components";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Design";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Res";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\uSynEdit\Source";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Dcu\Delphi2021";"C:\Program Files (x86)\FMSoft\Framework\uniTools";"C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2021" -K00400000 --description:"FMSoft uniTools Library" -NBC:\Users\Public\Documents\Embarcadero\Studio\19.0\Dcp -NHC:\Users\Public\Documents\Embarcadero\Studio\19.0\hpp\Win32 -NO"C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2021"   uniTools25.dpk   
    C:\Program Files (x86)\FMSoft\Framework\uniTools\uniTools25.dpk(46,39): error F2063: F2063 Could not compile used unit 'InstDecode'
Done building target "_PasCoreCompile" in project "uniTools25.dproj" -- FAILED.
Done building project "uniTools25.dproj" -- FAILED.
Build FAILED.
C:\Program Files (x86)\FMSoft\Framework\uniTools\uniTools25.dpk(46,39): error F2063: F2063 Could not compile used unit 'InstDecode'
    0 Warning(s)
    1 Error(s)
Time Elapsed 00:00:00.21

  • 0

#11 eddiemuniz71

eddiemuniz71

    Member

  • Members
  • PipPip
  • 11 posts

Posted 26 November 2017 - 04:53 PM

I have Delphi 10.1 Berlin is installed on my E: Drive and Tokyo 10.2 on the C: Drive.  I am trying to install Unigui on the 10.2. 

 

I have some other third party stuff installed.  TMSoftware, I have Zbar, Konopka VCL Controls, Fast Reports, Maybe one other.    

 

Not sure this matters but letting you know just in case.


  • 0

#12 Farshad Mohajeri

Farshad Mohajeri

    Administrator

  • Administrators
  • 9874 posts

Posted 26 November 2017 - 05:30 PM

Can it be this?

 

https://forums.embar...47942&tstart=-1


  • 0

#13 eddiemuniz71

eddiemuniz71

    Member

  • Members
  • PipPip
  • 11 posts

Posted 26 November 2017 - 06:58 PM

That thread  is something related to IOS APP compiling I dont understand what you mean by this ?


  • 0

#14 Farshad Mohajeri

Farshad Mohajeri

    Administrator

  • Administrators
  • 9874 posts

Posted 27 November 2017 - 05:28 AM

That thread  is something related to IOS APP compiling I dont understand what you mean by this ?

 

I mean the issue can be something related to Delphi settings.

Can you try on a different instance of Delphi installation?


  • 0

#15 eddiemuniz71

eddiemuniz71

    Member

  • Members
  • PipPip
  • 11 posts

Posted 27 November 2017 - 12:30 PM

I am not running any victuals this is the base Windows 10 OS.and both Delphi versions are on this machine.

 

I will try on a different machine at my office in a couple of hours and report back.

 

Let me ask you if this is an issue of the Trial version only or would I encounter the same issues with the paid version ?  

 

I am ready to purchase your product and dont care to continue messing around with the trial if the paid version will resolve this problem you beleive then let me know so I can pay and get started.  I dont have time on my side here to get this going.

 

Please let me know.

 

Eddie M


  • 0

#16 Farshad Mohajeri

Farshad Mohajeri

    Administrator

  • Administrators
  • 9874 posts

Posted 27 November 2017 - 12:34 PM

Hi,

 

I can't say that it will be different with regular version. Both versions use same way to install DCUs and other things.

There must be an issue specific to your system.


  • 0

#17 eddiemuniz71

eddiemuniz71

    Member

  • Members
  • PipPip
  • 11 posts

Posted 27 November 2017 - 02:53 PM

How can I do a complete cleanup of any Unigui installs including any registry entries or whatever.  I have a feeling of I can clean everything up and reinstall that it might correct the issue.

 

Is doing a Remove programs enough to clean out 100% Unigui and all its references ?  

 

I am using TMSSoftware VCL utils any known issues with conflicts ?  Or with FastReports ?

 

EM


  • 0

#18 Farshad Mohajeri

Farshad Mohajeri

    Administrator

  • Administrators
  • 9874 posts

Posted 27 November 2017 - 04:17 PM

First of all, have you tried on a different PC?

 

Uninstalling uniGUI removes all registry settings from Windows.


  • 0

#19 eddiemuniz71

eddiemuniz71

    Member

  • Members
  • PipPip
  • 11 posts

Posted 27 November 2017 - 09:13 PM

Ok so the install worked at my office machine. 

 

So we know its something in that machine but what is it ?  I need this to work on both machines.

 

Any ideas as to what I can do.  do not want to uninstall Delphi completely as that is a pain in the A** because of the licensing and manual process that needs to occur to do a full clean.

 

Let me know your thoughts.

 

EM


  • 0

#20 eddiemuniz71

eddiemuniz71

    Member

  • Members
  • PipPip
  • 11 posts

Posted 07 December 2017 - 12:46 AM

Frustrating,  I have had to setup a virtual and install the trial there, that works but not getting it to work or knowing why in the other user is a problem.

 

I guess this one is filed in the mystery box or the box of too much work to figure out problem.

 

EM


  • 0




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users