[uniGUI 1.90.0 build 1568] HyperServer Settings

[bruno65]

Does HyperServer Settings overload ServerModule Settings ? (Max Requests, Max Sessions, ...)

In general, for upt to 2000 max connected sessions is it better to increase nodes and decrease 'sessions per node' or rather the opposite ?

the idea is to have :

- 3 servers : 1 master with IIS and 2 slaves 

- equal distribution of traffic => configure the same max nodes on each server

what else ?

[bruno65]

another question when i use Stress Test Tool and launch 20 sessions per run :

I configured 5 sessions per nodes on the master server and hyperserver runs as ISAPI through IIS

why can we have more than 5 sessions in both nodes below ( respectively 8 & 10 ) ?

why the hyperserver don't create more than 2 nodes ? (max nodes is 10)

 

In the second server - the slave - hyperserver runs as service windows

Only 2 users sessions on this slave server and 18 on the master server. 10 / ( 10 + 3 ) ~ 77 % of the traffic for the master 

Is it because max nodes is 3 for the slave and 10 for the master ? 3 / ( 10 + 3 ) * 100 ~ 23 % of the traffic for the slave 

But according to the documentation : 10 / ( 10 + 3 ) ~ 77 % of the traffic for the master And 3 / ( 10 + 3 ) * 100 ~ 23 % of the traffic for the slave

So for 20 actives sessions : we should have 15 (or 16) sessions for the master and 5 (or 4) sessions for the slave...

[bruno65]

With another configurations (the same for the master and the slave). Launch 25 sessions with the Stress Test Tool :

 

i don't understand why there is only 1 active node with 9 sessions on the master. 

i expected more nodes and more sessions on the master among the 25 sessions and 5 max nodes on each server

[Farshad Mohajeri]

Hi,

uniGUI tries to distributes sessions in a uniform way among servers. It is calculated based on MaxNodes property of each Server Node.  In your tests with stress test toll you must use more sessions to make a realistic test. For example 100 sessions at least.

BTW, try to test your app always with latest uniGUI build, as we may have improved or fixed bugs.

[bruno65]

OK. Currently we migrate our uniGUI application with a Professional Edition 1.90.0 build 1568. For upgrading to the last version 1.95.0.1584 what is the price ? Can you give us improvements between these 2 versions about distribution sessions in a uniform way among servers ? In fact we can't test with the Stress Test Tool & the lastest trial version because a session duration is limited upto 5 minutes.