WebCam Security, Monitoring, Tracking and Warning System

[EpikBalad]

WebCam Security, Monitoring, Tracking and Warning System

The purpose here is to use and detect devices with camera systems without your knowledge.
More than one device can be used by obtaining more than one ID. Attention should be paid to the ID system.

Demo Link;
https://epikbalad2.myftp.org:3199/myweb/mcam.dll/m (Mobile)
The following activation membership system works with the run address.

Use only the name of your e-mail address registered in the Gmail system to the authorized area.
(@gmail.com system will use, this will also be your username)
In order for it to work on other users or on more than one device, the ID system that I created has been created. Activation ID code and Link will be sent to your e-mail address you use.
Example: https://epikbalad2.myftp.org:3199/myweb/mcam.dll/m?ID=1234567890
Login to the system should always be made using the address that is the ID system.
After entering the authorization and password information in the upper right corner
system login button becomes active.
Keep the login logged, if the confirmation is given, the system opens without entering the automatic password information.

 

If the User Name and Password information is entered incorrectly in the first round, the screen will appear every time.
The user will be forced to enter the captcha verification code.

Captcha was written by me using only standard delphi codes and font changes.

After the Authorization, Password verification process, the software asks for application permissions for the camera, you must give it. The greeting screen welcomes you.
If you want to cancel automatic login, after automatic login to the system, using the lower left red button, Automatic login
You can cancel the system.

There is Log Tracking.
When the Security System is activated, (Start&Stop). Different picture, warning, e-mail sending times Log file is kept.
Stop&Start Delete Log
Log information is deleted when the Security System is started, stopped and restarted.
Check Min(1-10)
From 1 to 10, the control timer operates.
Sensibility
Low, 50%
Normal, 25%
high, 10%
If there is a large change in the shooting screen, a warning is received.

E-Mail YES
When security problem occurs, E-Mail is Sent.
Email
When a security problem occurs, an e-mail is sent to the specified address.
Picture Send YES
When a security problem occurs, a snapshot is taken and an E-Mail Attachment is created.

Alarm ON
When there is a security system problem, the audible warning system works.
Playing Time
There are Short, Normal, Long playback modes.
Ringing Sound
Security warning sound can be selected.
Repeat Play
It can be determined how many times the sound warning will be repeated.

Control is provided by pressing the test button. (Enable=False when the test button is Off)

If desired, password change or user can remove himself from the system.
If the password is typed correctly, the transaction button on the upper right corner will be active and the Remove account button can be activated.
Password change By typing New and New the same again and pressing the upper right button, password change is provided.

System Security control is the main screen.
If the Start Toggle is activated, the Security system provides control.
Red and Green button and Parameter (Top Right) buttons are turned into a passive state when the system is active,
buttons are activated in the system inactive state.
The red button is the Log File delete button at any time. (Warning is given, if approved, it will be deleted.)

The Green Button allows you to send Log file information in HTML file format to your e-mail address as a File Attachment.

Security picture comparison working system settings;

Instant Control in selection, Android, Ios, Tablet, Laptop at the camera angle it monitors, (Low, Normal, High)
You will receive an Alert for every change.
Take Picture, Control in selection, Android, Ios, Tablet, Laptop at the camera angle it watches, the picture taken (Low, Normal, High)
You will receive alerts based on features.

Selected Area, if the control is in the selection, the corners if the picture is free, if it is horizontal, the bottom top, If vertical, the left right security system
executable.
In all cases, the camera angle is determined, the Capture button is pressed, then the next software is run, the same information is displayed.
To use it again, the Parameter save button in the upper left corner must be pressed.