After upgrading hardware, multiple errors

[MikeMike]

Hi!

I have recently upgraded my PC hardware and now Im getting multiple errors with UniGUI:

when starting Delhi IDE, I see "Verification failed"

when opening a project, I see "Property MonitoredKeys.Keys does not exist" and the same for some other properties.

 

If the licence is binded to hardware its a bit ridiculous cause in the modern word we can often change hardware, work from different places even from VPS , or , for example of my particular case, when travelling I use to carry only SSD disk with me , and plug it in any PC I can find around

 

[Farshad Mohajeri]

Hi,

Please reinstall unigui with a fresh key you get from portal during installation. Unigui protection is sensitive to hardware changes.

[Farshad Mohajeri]

8 minutes ago, MikeMike said:

for example of my particular case, when travelling I use to carry only SSD disk with me , and plug it in any PC I can find around

Well, unigui must be installed on host pc. It won't work from a SSD unless you carry a full VM in your portable SSD.

[Farshad Mohajeri]

6 minutes ago, Farshad Mohajeri said:

Hi,

Please reinstall unigui with a fresh key you get from portal during installation. Unigui protection is sensitive to hardware changes.

In fact, CPU changes only.

[MikeMike]

32 minutes ago, Farshad Mohajeri said:

In fact, CPU changes only.

well... bad news. So every time I change CPU I must reinstall unigui ?

[Farshad Mohajeri]

27 minutes ago, MikeMike said:

well... bad news. So every time I change CPU I must reinstall unigui ?

Yes, but how frequent does this happen? Or how does your CPU change?

uniGUI is licensed to installed on multiple PC which belongs to you or solely used by you. So for example, a portable development environment is generally a portable PC which you are licenses to install uniGUI along with your desktop PC(s).

[MikeMike]

8 minutes ago, Farshad Mohajeri said:

how frequent does this happen? Or how does your CPU change?

I travel to a new place, buy or take an office PC and insert into it my primary SSD with Windows and all my tools and so on...

[MikeMike]

23 hours ago, Farshad Mohajeri said:

Please reinstall unigui with a fresh key you get from portal during installation

May you can issue an unitity to just replace some keys instead of reinstallig whole package?

[MikeMike]

23 hours ago, Farshad Mohajeri said:

Please reinstall unigui with a fresh key

by the way. reinstalling did not help.

 

After reinstalling there is no more "Verification failed" when starting the IDE, but there are still errors when loading a project "Property MonitoredKeys.Keys does not exist"  and so on.

 

Should I clean from Delphi first, and where do I found a manual how to reinstall it properly?

[MikeMike]

or should I recompile packages in Delphi after reinstalling?

[Farshad Mohajeri]

1 hour ago, MikeMike said:

or should I recompile packages in Delphi after reinstalling?

Yes. Same steps in installation instruction should be repeated.

[Farshad Mohajeri]

1 hour ago, MikeMike said:

May you can issue an unitity to just replace some keys instead of reinstallig whole package?

You can create a copy of uniGUI folder and restore it each time you return to your original PC. Key files are stored under uniGUI folder.

[MikeMike]

On 3/12/2025 at 10:47 PM, Farshad Mohajeri said:

You can create a copy of uniGUI folder and restore it each time you return to your original PC. Key files are stored under uniGUI folder.

 

Hi! It doesn work. I just moved my system on SSD to another PC and the problem happened again. Could you please change the verification process somehow so that the licence which I bought from you, will be related to the owner (me) but not to my CPU ID or some other hardware info?  I think you understand that people buy your soft not because it can't be cracked but because they respect your work

[MikeMike]

There is also a problem with EAppUniGUI. Im solvining it each time I have to reinstall Unigiu, but this time seems that my solution doesn't work:

 

[MikeMike]

By the way I found that the EAppUniGUI problem is related to the order in which UniGIU and Eurekalog are installed, because this unit is in both packages and it differs. That one shipped with Eureka does NOT compile (both are latest release versions)

[MikeMike]

I waited one year hoping the team to be able to solve the problem((

[MikeMike]

Once again the issue is:

each time I change hardware the library gives me plenty of problems. Despite I have bouught it. Please friends it should not work such way

[Farshad Mohajeri]

On 9/13/2025 at 6:39 PM, MikeMike said:

 

Hi! It doesn work. I just moved my system on SSD to another PC and the problem happened again. Could you please change the verification process somehow so that the licence which I bought from you, will be related to the owner (me) but not to my CPU ID or some other hardware info?  I think you understand that people buy your soft not because it can't be cracked but because they respect your work

There's no way for us to remove the protection mechanism. We are not protecting the software from regular buyers, but from those who buy for purpose of cracking or distributing in warez sites. 

[Farshad Mohajeri]

21 minutes ago, MikeMike said:

Once again the issue is:

each time I change hardware the library gives me plenty of problems. Despite I have bouught it. Please friends it should not work such way

This is something which can be easily resolved by reinstalling uniGUI. Something that you would do with each new build that we publish frequently. 

[MikeMike]

But you could fix the protection mechanism. Atleast crackers are able to do it   Once again let me explain: Just  reinstalling uniGUI does NOT WORK. Errors screenshots included in this topic. Also i dont need new build i just want to have working installation without issues is that so hard ?

[Farshad Mohajeri]

12 minutes ago, MikeMike said:

But you could fix the protection mechanism. Atleast crackers are able to do it   Once again let me explain: Just  reinstalling uniGUI does NOT WORK. Errors screenshots included in this topic. Also i dont need new build i just want to have working installation without issues is that so hard ?

Please share the screenshots again.

[Farshad Mohajeri]

On 9/13/2025 at 7:04 PM, MikeMike said:

There is also a problem with EAppUniGUI. Im solvining it each time I have to reinstall Unigiu, but this time seems that my solution doesn't work:

 

If you refer to this one, this is not related to our protection mechanism. This one is related to incompatibility raised in recent versions of 3rd party Eurekalog. We will try to fix this. You can temporarily fix by removing unit EAppUniGUI from uses list (Which means you won't be able to use Eurekalog, but your app will continue compiling)

[Frederick]

Hi Farshad,

I would also appreciate it if you could look at my post (

for the compatibility problems of EAppUniGUI with Eurekalog). Nobody from technical support has responded to it.

My thinking is that if you use Eurekalog as an example in your user's manual, I would expect that UniGUI's support files be kept compatible with current versions of Eurekalog. 

Hint: You may want to consider exploring if MadExcept can be used with UniGUI as well.

[Farshad Mohajeri]

22 hours ago, Frederick said:

Hi Farshad,

I would also appreciate it if you could look at my post (

for the compatibility problems of EAppUniGUI with Eurekalog). Nobody from technical support has responded to it.

My thinking is that if you use Eurekalog as an example in your user's manual, I would expect that UniGUI's support files be kept compatible with current versions of Eurekalog. 

Hint: You may want to consider exploring if MadExcept can be used with UniGUI as well.

Hi,

We are aware of Eurekalog issues and it is scheduled for the next or the following build.

[Frederick]

Noted. Thanks.