Jump to content

Build Error installing Trial Version


eddiemuniz71

Recommended Posts

I just added 10.2 Berlin to my existing 10.1,  tried to install and then build the units.  I get an error after building a couple of the units successfully.  When I build uniTools25.bpl  I get an error on this line

 

uniZLibEx in 'uniZLibEx.pas' {$ENDIF};  The units that follow that also give me the errors when trying to build them.

 

I have already attempted to clean, remove programs, and reinstall and build and I get stuck in the same spot.   PLease help !!

 

** Just went to that bpl and uniZlibEx.pas is Xout,  I searched for it and I cannot find that .pas file, alkso the uniZLib.Ex.pas.      Did I miss a step somewhere in the install process ??

 

 

Eddie M

Link to comment
Share on other sites

Thanks you for reply,

 

I dont have a 2018 folder I have a 2020 and a 2021 folder, did I install the wrong version ??   I am using Berlin and Tokyo.

 

UnZlibEx.dcu is in that folder.   

 

I have tried to uninstall and reinstall a few times.    I have a few drives on this machine.  I have an E: Drive and C: Drive I use for programs,  I initially started on the E and then decided to just put it on C when it did not work thinking it could be a path issue but that did not work either.

 

Sounds to me like its a some kind of path issue possibly ?

 

PLease advise as I need to test something and confirm that I want to purchase the full edition for a project I need to start on as soon as possible.

Let me know if you want me to post any additional info.

 

Thanks again !!

 

Eddie M

Link to comment
Share on other sites

I am sorry but still not working. 

  • Before downloading the new trial I went to Remove Programs and uninstalled FMSoft
  • then removed the FMSoft Folder that still existed in the Program Files(x86).
  • Reset the computer just in case
  • Downloaded the new version  1421
  • Ran the install (By the way it did not ask me for any of the user information, it went straight to the install folder quiestion
  • Install went without error. 
  • Opened Tokyo
  • Opened uniGUI_D10_2_Tokyo_PlusGroup
  • That gave me the list of the 13 bpls
  • Built R2021 no problem.
  • Build D2021 no problem
  • Build uniTools25 get an error.   When I expand the bpl I see that under contains uniDateUtils.pas and uniZlibEx.pas have a red X
  • Under Unigui25Core.bpl Contains  UniguiServerForm.pas also has an X.
  • In my C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2021  FOLDER  uniDateUtils,dcu and uniZlibEx.dcu are there but no .pas files.

I have installled the trial before and had no issues, when you say uninstall all design packages in your instructions I assume all FMSoft ones not ALL correct ?  If so under packages I am not seeing FMSoft there anywhere to be able to remove.    The only difference this time from the previous time I installed the trial a few months ago was that this time I only selected Berlin and Tokyo, last time I installed ALL versions.  

 

Hope this helps in figuring this out because I cannot make it work.  Your assistance is appreciated.

 

Eddie M

Link to comment
Share on other sites

Build started 11/26/2017 11:48:49 AM.

__________________________________________________

Project "C:\Program Files (x86)\FMSoft\Framework\uniTools\uniTools25.dproj" (Build target(s)):

Target BuildVersionResource:

    c:\program files (x86)\embarcadero\studio\19.0\bin\cgrc.exe -c65001 "uniTools25.vrc" -founiTools25.res 

    CodeGear Resource Compiler/Binder

    Version 1.2.2 Copyright © 2008-2012 Embarcadero Technologies Inc.

    

    Microsoft ® Windows ® Resource Compiler Version 6.0.5724.0

    

    Copyright © Microsoft Corporation.  All rights reserved.

    

    

    Deleting file "uniTools25.vrc".

    Deleting file "uniTools25.$manifest".

Target _PasCoreCompile:

    c:\program files (x86)\embarcadero\studio\19.0\bin\dcc32.exe -$D0 -$L- -$C- -$Y- --no-config -B -Q -Z -TX.bpl -AGenerics.Collections=System.Generics.Collections;Generics.Defaults=System.Generics.Defaults;WinTypes=Winapi.Windows;WinProcs=Winapi.Windows;DbiTypes=BDE;DbiProcs=BDE;DbiErrs=BDE -DRELEASE -I"c:\program files (x86)\embarcadero\studio\19.0\lib\Win32\release";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\Imports;"c:\program files (x86)\embarcadero\studio\19.0\Imports";C:\Users\Public\Documents\Embarcadero\Studio\19.0\Dcp;"c:\program files (x86)\embarcadero\studio\19.0\include";"E:\Program Files (x86)\Raize\RC6\Lib\RX10.2\Win32";"E:\Program Files (x86)\Raize\RadiantShapes\Lib\RX10.2\Win32";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\Delphi102Tokyo\Win32\Release";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\xlsAdapter";"E:\Program Files (x86)\FastReports\LibD25";"E:\Program Files (x86)\Winsoft\Camera for Android\Delphi101-Win32";"E:\Program Files (x86)\Winsoft\OBR for FireMonkey\Delphi101-Win32";"E:\Program Files (x86)\FastReports\LibD24";"E:\Program Files (x86)\Raize\RadiantShapes\Lib\RX10.1\Win32";"E:\Program Files (x86)\Raize\RC6\Lib\RX10.1\Win32";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\CatalogRepository\Essentials-1.1\source;"C:\Program Files (x86)\FastReports\FastReport FMX Embarcadero edition\LibD24r";f:\users\eddie\documents\embarcadero\studio\utilities\tmseditcontrols;"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Dcu\Delphi2020";"C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2020";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\Delphi101Berlin\Win32\Release";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\CatalogRepository\Essentials-1.2\source;"E:\Program Files (x86)\Devart\SDAC for RAD Studio 10.2\Lib\Win32";"E:\Program Files (x86)\Devart\SDAC for RAD Studio 10.2\Bin\Win32";"C:\Program Files (x86)\FMSoft\Framework\uniGUI";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\uIndy";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Core";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\VCL";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Components";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Design";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Res";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\uSynEdit\Source";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Dcu\Delphi2021";"C:\Program Files (x86)\FMSoft\Framework\uniTools";"C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2021" -LEC:\Users\Public\Documents\Embarcadero\Studio\19.0\Bpl -LNC:\Users\Public\Documents\Embarcadero\Studio\19.0\Dcp -NU"C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2021" -NSWinapi;System.Win;Data.Win;Datasnap.Win;Web.Win;Soap.Win;Xml.Win;Bde;System;Xml;Data;Datasnap;Web;Soap; -O"c:\program files (x86)\embarcadero\studio\19.0\lib\Win32\release";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\Imports;"c:\program files (x86)\embarcadero\studio\19.0\Imports";C:\Users\Public\Documents\Embarcadero\Studio\19.0\Dcp;"c:\program files (x86)\embarcadero\studio\19.0\include";"E:\Program Files (x86)\Raize\RC6\Lib\RX10.2\Win32";"E:\Program Files (x86)\Raize\RadiantShapes\Lib\RX10.2\Win32";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\Delphi102Tokyo\Win32\Release";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\xlsAdapter";"E:\Program Files (x86)\FastReports\LibD25";"E:\Program Files (x86)\Winsoft\Camera for Android\Delphi101-Win32";"E:\Program Files (x86)\Winsoft\OBR for FireMonkey\Delphi101-Win32";"E:\Program Files (x86)\FastReports\LibD24";"E:\Program Files (x86)\Raize\RadiantShapes\Lib\RX10.1\Win32";"E:\Program Files (x86)\Raize\RC6\Lib\RX10.1\Win32";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\CatalogRepository\Essentials-1.1\source;"C:\Program Files (x86)\FastReports\FastReport FMX Embarcadero edition\LibD24r";f:\users\eddie\documents\embarcadero\studio\utilities\tmseditcontrols;"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Dcu\Delphi2020";"C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2020";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\Delphi101Berlin\Win32\Release";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\CatalogRepository\Essentials-1.2\source;"E:\Program Files (x86)\Devart\SDAC for RAD Studio 10.2\Lib\Win32";"E:\Program Files (x86)\Devart\SDAC for RAD Studio 10.2\Bin\Win32";"C:\Program Files (x86)\FMSoft\Framework\uniGUI";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\uIndy";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Core";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\VCL";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Components";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Design";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Res";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\uSynEdit\Source";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Dcu\Delphi2021";"C:\Program Files (x86)\FMSoft\Framework\uniTools";"C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2021" -R"c:\program files (x86)\embarcadero\studio\19.0\lib\Win32\release";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\Imports;"c:\program files (x86)\embarcadero\studio\19.0\Imports";C:\Users\Public\Documents\Embarcadero\Studio\19.0\Dcp;"c:\program files (x86)\embarcadero\studio\19.0\include";"E:\Program Files (x86)\Raize\RC6\Lib\RX10.2\Win32";"E:\Program Files (x86)\Raize\RadiantShapes\Lib\RX10.2\Win32";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\Delphi102Tokyo\Win32\Release";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\xlsAdapter";"E:\Program Files (x86)\FastReports\LibD25";"E:\Program Files (x86)\Winsoft\Camera for Android\Delphi101-Win32";"E:\Program Files (x86)\Winsoft\OBR for FireMonkey\Delphi101-Win32";"E:\Program Files (x86)\FastReports\LibD24";"E:\Program Files (x86)\Raize\RadiantShapes\Lib\RX10.1\Win32";"E:\Program Files (x86)\Raize\RC6\Lib\RX10.1\Win32";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\CatalogRepository\Essentials-1.1\source;"C:\Program Files (x86)\FastReports\FastReport FMX Embarcadero edition\LibD24r";f:\users\eddie\documents\embarcadero\studio\utilities\tmseditcontrols;"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Dcu\Delphi2020";"C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2020";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\Delphi101Berlin\Win32\Release";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\CatalogRepository\Essentials-1.2\source;"E:\Program Files (x86)\Devart\SDAC for RAD Studio 10.2\Lib\Win32";"E:\Program Files (x86)\Devart\SDAC for RAD Studio 10.2\Bin\Win32";"C:\Program Files (x86)\FMSoft\Framework\uniGUI";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\uIndy";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Core";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\VCL";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Components";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Design";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Res";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\uSynEdit\Source";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Dcu\Delphi2021";"C:\Program Files (x86)\FMSoft\Framework\uniTools";"C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2021" -U"c:\program files (x86)\embarcadero\studio\19.0\lib\Win32\release";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\Imports;"c:\program files (x86)\embarcadero\studio\19.0\Imports";C:\Users\Public\Documents\Embarcadero\Studio\19.0\Dcp;"c:\program files (x86)\embarcadero\studio\19.0\include";"E:\Program Files (x86)\Raize\RC6\Lib\RX10.2\Win32";"E:\Program Files (x86)\Raize\RadiantShapes\Lib\RX10.2\Win32";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\Delphi102Tokyo\Win32\Release";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\xlsAdapter";"E:\Program Files (x86)\FastReports\LibD25";"E:\Program Files (x86)\Winsoft\Camera for Android\Delphi101-Win32";"E:\Program Files (x86)\Winsoft\OBR for FireMonkey\Delphi101-Win32";"E:\Program Files (x86)\FastReports\LibD24";"E:\Program Files (x86)\Raize\RadiantShapes\Lib\RX10.1\Win32";"E:\Program Files (x86)\Raize\RC6\Lib\RX10.1\Win32";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\CatalogRepository\Essentials-1.1\source;"C:\Program Files (x86)\FastReports\FastReport FMX Embarcadero edition\LibD24r";f:\users\eddie\documents\embarcadero\studio\utilities\tmseditcontrols;"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Dcu\Delphi2020";"C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2020";"F:\Users\eddie\Documents\tmssoftware\TMS Component Pack\Delphi101Berlin\Win32\Release";F:\Users\eddie\Documents\Embarcadero\Studio\19.0\CatalogRepository\Essentials-1.2\source;"E:\Program Files (x86)\Devart\SDAC for RAD Studio 10.2\Lib\Win32";"E:\Program Files (x86)\Devart\SDAC for RAD Studio 10.2\Bin\Win32";"C:\Program Files (x86)\FMSoft\Framework\uniGUI";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\uIndy";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Core";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\VCL";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Components";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Design";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Source\Res";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\uSynEdit\Source";"C:\Program Files (x86)\FMSoft\Framework\uniGUI\Dcu\Delphi2021";"C:\Program Files (x86)\FMSoft\Framework\uniTools";"C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2021" -K00400000 --description:"FMSoft uniTools Library" -NBC:\Users\Public\Documents\Embarcadero\Studio\19.0\Dcp -NHC:\Users\Public\Documents\Embarcadero\Studio\19.0\hpp\Win32 -NO"C:\Program Files (x86)\FMSoft\Framework\uniTools\Dcu\Delphi2021"   uniTools25.dpk   

    C:\Program Files (x86)\FMSoft\Framework\uniTools\uniTools25.dpk(46,39): error F2063: F2063 Could not compile used unit 'InstDecode'

Done building target "_PasCoreCompile" in project "uniTools25.dproj" -- FAILED.

Done building project "uniTools25.dproj" -- FAILED.

Build FAILED.

C:\Program Files (x86)\FMSoft\Framework\uniTools\uniTools25.dpk(46,39): error F2063: F2063 Could not compile used unit 'InstDecode'

    0 Warning(s)

    1 Error(s)

Time Elapsed 00:00:00.21
Link to comment
Share on other sites

I have Delphi 10.1 Berlin is installed on my E: Drive and Tokyo 10.2 on the C: Drive.  I am trying to install Unigui on the 10.2. 

 

I have some other third party stuff installed.  TMSoftware, I have Zbar, Konopka VCL Controls, Fast Reports, Maybe one other.    

 

Not sure this matters but letting you know just in case.

Link to comment
Share on other sites

I am not running any victuals this is the base Windows 10 OS.and both Delphi versions are on this machine.

 

I will try on a different machine at my office in a couple of hours and report back.

 

Let me ask you if this is an issue of the Trial version only or would I encounter the same issues with the paid version ?  

 

I am ready to purchase your product and dont care to continue messing around with the trial if the paid version will resolve this problem you beleive then let me know so I can pay and get started.  I dont have time on my side here to get this going.

 

Please let me know.

 

Eddie M

Link to comment
Share on other sites

How can I do a complete cleanup of any Unigui installs including any registry entries or whatever.  I have a feeling of I can clean everything up and reinstall that it might correct the issue.

 

Is doing a Remove programs enough to clean out 100% Unigui and all its references ?  

 

I am using TMSSoftware VCL utils any known issues with conflicts ?  Or with FastReports ?

 

EM

Link to comment
Share on other sites

Ok so the install worked at my office machine. 

 

So we know its something in that machine but what is it ?  I need this to work on both machines.

 

Any ideas as to what I can do.  do not want to uninstall Delphi completely as that is a pain in the A** because of the licensing and manual process that needs to occur to do a full clean.

 

Let me know your thoughts.

 

EM

Link to comment
Share on other sites

  • 2 weeks later...
  • Administrators

Frustrating,  I have had to setup a virtual and install the trial there, that works but not getting it to work or knowing why in the other user is a problem.

 

I guess this one is filed in the mystery box or the box of too much work to figure out problem.

 

EM

 

It can happen when there is a version mismatch for certain units. For example, when the Delphi version is not the exact same version that is used to build the DCUs.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...