brace Posted March 8, 2013 Share Posted March 8, 2013 I tried to install 0.92 in XE2. I followed the instruction but when it comes to buiding packages I don't see the Install menuitem after building (see Screenshot attached). So i cannot install packages. Note: For XE2 I used: uniGUI2012Group Which could be the reasons? Moreover I own TeeChart professional and i cannot build the chart packages. Is this issue addresses? Link to comment Share on other sites More sharing options...
Administrators Farshad Mohajeri Posted March 8, 2013 Administrators Share Posted March 8, 2013 Building all packages is not enough. You need to "install" design time packages too. Link to comment Share on other sites More sharing options...
brace Posted March 8, 2013 Author Share Posted March 8, 2013 I made this video: http://screencast.com/t/YY0cjEfnvtPh in which I show the 2 problems: no "install" menuitem teechart professioanl (i think this will be addresses in 1.0) Link to comment Share on other sites More sharing options...
Administrators Farshad Mohajeri Posted March 8, 2013 Administrators Share Posted March 8, 2013 In pro version package name is not "tee" perhaps. Replace the package name with correct one. Install menu appears for all Design time packages which you need to install. Link to comment Share on other sites More sharing options...
brace Posted March 8, 2013 Author Share Posted March 8, 2013 You mean i don't need to install SynEdit_R2012 ? Link to comment Share on other sites More sharing options...
brace Posted March 8, 2013 Author Share Posted March 8, 2013 BTW I see I can run demos and see them on http://localhost:8077/ does it mean installer installed the packages for me? Link to comment Share on other sites More sharing options...
brace Posted March 8, 2013 Author Share Posted March 8, 2013 If I open Servermodule I have main.pas of a demo i have [Window Title] Error [Content] Error creating form: Error reading MainForm.MonitoredKeys.Keys: Property MonitoredKeys.Keys does not exist. [OK] so something is not ok Link to comment Share on other sites More sharing options...
brace Posted March 8, 2013 Author Share Posted March 8, 2013 i Opened one servermodule.dfm from notepad and change port from 8077 to another value and i can buildin delphi, so somehow i have design time packages problems. Can you help? (sorry for so many messages) Link to comment Share on other sites More sharing options...
Administrators Farshad Mohajeri Posted March 8, 2013 Administrators Share Posted March 8, 2013 After building all packages install design time packages by right-clicking and selecting Install in following order: SynEdit_D20xx.bpl uniGUIxxdcl.bpl uniGUIxxExdcl.bpl uniGUIxxChartdcl.bpl Link to comment Share on other sites More sharing options...
brace Posted March 8, 2013 Author Share Posted March 8, 2013 I do not have install button after building... Link to comment Share on other sites More sharing options...
Administrators Farshad Mohajeri Posted March 8, 2013 Administrators Share Posted March 8, 2013 Then you must install teamviewer and allow me to investigate what's happening.. Link to comment Share on other sites More sharing options...
asapltda Posted May 11, 2013 Share Posted May 11, 2013 Hello, I have also had problems installing in delphi x2. But I think it would be important that indicate packages to install version. For Example X2, X3,,, or if not possible there was a parcel load instruction for each version of Delphi. I will continue as installing lines to see I've done the wrong way Link to comment Share on other sites More sharing options...
eelias Posted September 30, 2013 Share Posted September 30, 2013 HI there, Well, I have decided to start a new project using uniGUI and give a try with it! Lets see how it will respond to the task, I am with a great hope it will work very well. I am right now having the same trouble related before on this thread: MainForm.MonitoredKeys.Keys: Property MonitoredKeys.Keys does not exist When opening the loginform demo. I have openede the uniGUI2012Group on Delphi XE2 update 4 and build it. Also I have installed the 4 packages on the order mentioned on the tutorial. Seems that all of them got installed according to the dialogs (same as the tutorial) I have removed and installed all over again and I could not solve the problem. I see on installed design packages 3 packaged named FMSoft and the SynEdit package as well. I have no idea what else is needed. I used to have synedit package installed before, I removed it from the package list before installing uniGUI since it was conflicting. After removing it I could install the uniGUI package. Installed under Windows XP SP3 with fmsoft_unigui_beta_0.93.1.1000_setup.exe Thanks for any help. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now