naozuka Posted February 27, 2018 Share Posted February 27, 2018 Hi there. I'm with a problem here. I bought a license on my company and installed sucessfully on Rad Studio XE2 on my machine. Then I bought more three licenses but the machines doesn't have Rad Studio. Only C++ Builder XE2 (without Delphi). Is there a way to install without Delphi or using my machine that has Rad Studio XE2 installed? Best regards, Naozuka. Link to comment Share on other sites More sharing options...
Administrators Farshad Mohajeri Posted February 28, 2018 Administrators Share Posted February 28, 2018 Hi, Unfortunately, installing uniGUI for CPP requires RAD Studio so you can generate all required HPP files and OBJ files from DCUs. This can not be done using CPP Builder only. Probably you'll need to temporarily install RAD Studio on other PCs and remove it after installation. Or you can manually move HPP and OBJ files to those systems. Again you need to install uniGUI on those PCs first to get proper license keys for each system. Link to comment Share on other sites More sharing options...
naozuka Posted February 28, 2018 Author Share Posted February 28, 2018 Hi Farshad, I tried copying folder hpp, dcp and bpl from "C:\Users\Public\Documents\RAD Studio\9.0" from my pc to the other with no delphi installation. But when I tried to install the bpl it gives me the message "Verification Failed". I don't know if I have to copy any file to "C:\Program Files (x86)\FMSoft". I'm using version 1.0.0.1416. Link to comment Share on other sites More sharing options...
Administrators Farshad Mohajeri Posted February 28, 2018 Administrators Share Posted February 28, 2018 Hi, Problem here is that those BPLs are compiled with license key form PC #1 and moving them to PC #2 will not work. Another way can be installing Trial edition of RAD Studio and compiling your BPLs using it. Link to comment Share on other sites More sharing options...
naozuka Posted February 28, 2018 Author Share Posted February 28, 2018 I'll try with XE2 Trial then. So, there is no way with copying files? I thought the version file was in C:\Program Files. Link to comment Share on other sites More sharing options...
naozuka Posted March 1, 2018 Author Share Posted March 1, 2018 Hi Farshad, I've found another solution using RAD Studio Command Prompt and the commands below. cd c:\Program Files (x86)\FMSoft\Framework\uniGUI\uSynEdit\Packages msbuild uSynEdit_R2012.dproj /p:Configuration=Release /p:DCC_CBuilderOutput=All msbuild uSynEdit_D2012.dproj /p:Configuration=Release /p:DCC_CBuilderOutput=All cd c:\Program Files (x86)\FMSoft\Framework\uniTools msbuild uniTools16.dproj /p:Configuration=Release /p:DCC_CBuilderOutput=All cd c:\Program Files (x86)\FMSoft\Framework\uniGUI\uIndy msbuild uIndy16.dproj /p:Configuration=Release /p:DCC_CBuilderOutput=All cd c:\Program Files (x86)\FMSoft\Framework\uniGUI\source\core msbuild uniGUI16Core.dproj /p:Configuration=Release /p:DCC_CBuilderOutput=All cd c:\Program Files (x86)\FMSoft\Framework\uniGUI\source\components msbuild uniGUI16.dproj /p:Configuration=Release /p:DCC_CBuilderOutput=All cd c:\Program Files (x86)\FMSoft\Framework\uniGUI\source\vcl msbuild uniGUI16VCL.dproj /p:Configuration=Release /p:DCC_CBuilderOutput=All cd c:\Program Files (x86)\FMSoft\Framework\uniGUI\source\design msbuild uniGUI16dcl.dproj /p:Configuration=Release /p:DCC_CBuilderOutput=All cd c:\Program Files (x86)\FMSoft\Framework\uniGUI\source\components msbuild uniGUI16Chart.dproj /p:Configuration=Release /p:DCC_CBuilderOutput=All cd c:\Program Files (x86)\FMSoft\Framework\uniGUI\source\design msbuild uniGUI16Chartdcl.dproj /p:Configuration=Release /p:DCC_CBuilderOutput=All Then I add the bpl manually with uniGUI16dcl and uniGUI16Chartdcl in Component -> Install Packages. Link to comment Share on other sites More sharing options...
Sherzod Posted March 1, 2018 Share Posted March 1, 2018 Hi, Also please adjust your forum email address: http://forums.unigui.com/index.php?/topic/6291-new-users-please-adjust-your-forum-email-address/ Best regards, Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now